Concrete art transforms space, expanding it and giving it consistency, modernity and personality.

These are the interior surfaces, each one with its own character but all united by the durability of concrete coupled with elegance and colour choices brought together with extreme care to detail.

These unique finishes offer comfort, warmth and hospitality to the space but also character and originality to commercial, public, tourist and cultural spaces

Beaton  is perfect for anyone who is looking for a unique and elegant finish, a seamless, continuous and extremely solid surface that can give any space depth, light and harmony, all at the same time.

Beaton was originally used as a replacement for concrete because of its numerous advantages – it can be applied at reduced thicknesses, adheres firmly to the underlying surface and is simple and quick to install. Now it can be adapted beautifully to any environment, bestowing an original and unrepeatable touch as it is laid by hand by expert craftsmen.

Beaton can lend character to modern, minimalist spaces, or bring discreet sophistication with classic, rustic or antique finishes to existing property. You can personalise it to your own style, choosing the colour scheme you prefer and adding shiny, cloudy or variegated effects to make it exactly as you like.

is also part of the new generation of innovative green and smart decorative products. Due to natural ingredients that blend cement and water-based polymers, It  has a minimal impact on the environment and meets sustainable architectural requirements for indoor air quality, adaptability and transformation.

This has a thickness of just 3 mm which can be applied to both vertical and horizontal surfaces. They possess high  abrasion resistance, excellent adhesion to the substrate as well as compression resistance in addition to having  impact resistance and anti skid properties.

Each material used and application procedure.

FLOOR  SYSTEM.

1. SURFACE PREPARATION

On concrete, apply Cem-Prime. – On Glazed floor tiles, apply Cem-Grip. 2. 

2. BASE COAT APPLICATION

On horizontal surfaces, apply CEM-BASE and sand with a 40 grid once the surface has hardened.

3. APPLICATION

Apply beaton in two coats. Once the first coat has dried, apply the second coat, wait for it to harden before sanding the surface with a 150 or 220 grid.

4. PROTECTIVE COAT APPLICATION Apply the appropriate protective topcoat depending on the intended use of the surface and its location.

Refer to the intended use table of the brochure and technical data sheet for additional details.

WALL System:

1. SURFACE PREPARATION – On concrete, apply Fondo F. – On glazed tiles, apply the Putty exterior skim coat system.

2. Microtop APPLICATION Apply  in two coats. Once the first coat has dried, apply the second coat, wait for it to harden before sanding the surface with a 150 or 220 grid.

3. PROTECTIVE COAT APPLICATION Apply the appropriate protective topcoat depending on the intended use of the surface and its location. Refer to the intended use table of the brochure and technical data sheet for additional details.

General Maintenance

Some elementary precautions and regular care can keep your microtop Floor in good condition and extend the decorative appearance and life expectancy of any Cementric Flooring System.

Before cleaning your new floor, you should sweep the area to remove any loose debris using a soft pad mop or a floor scrubber cleaner in combination with protective products based on self-polishing waxes dispersed in water. If the floor is to be washed n Sweep or vacuum the floor to remove dust and debris using a soft bristle broom or vacuum cleaner.  Dilute a PH neutral detergent in clean water. Apply the solution to the floor, using a soft medium pad.

 It is important that all detergent residue is removed from the surface of the floor, because detergent can become slippery, which affects safety, or may remain sticky which attracts and holds more dirt. 

Precautions :

Although Colortek floors have good mechanical resistance, they may be subject as all materials to time related degradation such as scratches, shine loss etc.

Fine particles of dust, dirt and loose debris, act as abrasives with traffic unless the floor is cleaned regularly.

Elementary precautions should also be taken to properly maintain the floor. Provide a doormat at the entrance that can trap dust, sand and abrasive particles.

Put felt pads under the furniture, especially movable articles like chairs.  In the event that heavy furniture has to be moved, place woolen cloth at the base of the furniture.

Before carrying out painting, electrical or plumbing works, protect the floor with woolen blankets and nylon sheets.

Quickly clean all stagnant spills of aggressive liquids such as wine, oils, vinegar and coffee.